Lessons on this page
1Choose the patient
- Click 3D Scans in the left menu.
- The page says Pick a patient to begin.
- Click the search box and type the patient name or phone number.
- Click the patient in the list.
- If the patient is new, click New patient beside the search box, fill the patient form and save. The new patient is chosen for you.
Note: Every scan must belong to a patient. You cannot upload a scan without choosing one.
3D Scans
Open an intraoral scan, join the upper and lower arches, and rotate it like a real study model.
2Upload the scan files
- Choose the patient on the 3D Scans page.
- Click Upload scan or ZIP.
- Pick the ZIP file that your scanner exported, or pick one or more .stl files.
- Wait while it says Uploading....
- A green line shows, for example "3 scans added — 3 labelled automatically."
- The scans appear in the list on the left as Upper Arch, Lower Arch or Bite Registration, with the file size.
Tip: Keep the scanner file names. The software reads words like "upper", "maxillary", "lower", "mandibular" or "bite" in the file name to know which jaw it is.
Note: Only .stl files, or a .zip that has .stl files inside, are accepted. Other 3D types (such as .ply or .obj) cannot be uploaded. One file can be up to 120 MB. If the name gives no hint, the scan is listed as Other and cannot join the bite view — rename the file with "upper" or "lower" and upload again.
3D Scans
3 scans for Rahul Sharma
3Remove a scan
- Open 3D Scans and choose the patient.
- Move the mouse over the scan in the left list.
- Click the small bin that appears at its right.
- Click OK on the question "Remove this scan?".
Note: There is no trash for 3D scans. A removed scan must be uploaded again.
3D Scans
3 scans for Rahul Sharma
Did this not solve it? Message our support team and we will help you.
