What it is forA list of people who asked about treatment but are not yet patients. You note what they want and when to call them back.
What you getNo enquiry is forgotten. You can see who to call today and turn a lead into a patient with one click.
Where to find itLeft menu → Leads
Who can use itOwner and staff with the Leads permission

1Add a new lead

  1. Open Leads from the left menu.
  2. Click Add lead.
  3. Type the name in Full name *. This is the only must-fill box.
  4. Type the Phone and Email if you have them.
  5. In Problem / interest, write what the person asked about.
  6. Pick a date in Follow up on to remind yourself to call back.
  7. Fill Referred by, Preferred doctor, Birthday, Anniversary and Notes if you know them.
  8. Click Add lead.

Tip: Always add a phone number. Without it the Call and WhatsApp icons are not shown on the lead card.

Note: A lead you type in gets the source label "Manual" and the status "New".

Drawing of the screen. Your own names and numbers will be different.

2Read the lead cards and the four count boxes

  1. Open Leads from the left menu.
  2. Look at the four boxes on top: New, Contacted, Converted and Lost. Each shows how many leads are in that stage.
  3. Look at a lead card. It shows the name, phone, status, what they asked about, the source and the follow-up date.
  4. A card with an amber border has a follow-up that is due today or is late.

Tip: The source label tells you where the lead came from: Manual, CSV Import, Website Form, Booking Link or Recall.

Drawing of the screen. Your own names and numbers will be different.

3Find a lead with search and filters

  1. Open Leads from the left menu.
  2. Type in the box Search by name, phone or interest... to find a lead.
  3. Click one of the top boxes, for example Contacted, to see only that stage. Click it again to see all.
  4. Open All sources and pick a source, for example Website Form.
  5. You can use search, stage and source together.

Tip: If you see "Nothing matches that", clear the search box and the filters.

Drawing of the screen. Your own names and numbers will be different.

4See who you must call today

  1. Open Leads from the left menu.
  2. Click Follow-ups due. The number in brackets is how many are waiting.
  3. Only leads with a follow-up date of today or earlier are shown.
  4. Call each one, then update the lead.
  5. Click Follow-ups due again to see all leads.

Tip: After the call, open the lead and set a new date in Follow up on, or change the status. Then it leaves this list.

Note: Leads with the status Converted or Lost are never counted as due.

Drawing of the screen. Your own names and numbers will be different.

5Call or WhatsApp a lead

  1. Open Leads and find the lead card.
  2. At the bottom left of the card, click the phone icon to call.
  3. Or click the chat bubble icon to open a WhatsApp chat with that number.
  4. Type your message in WhatsApp and send it yourself.

Tip: After you have spoken, click Mark contacted on the card.

Note: The two icons are shown only when the lead has a phone number.

Drawing of the screen. Your own names and numbers will be different.

6Mark a lead as contacted

  1. Open Leads and find a card with the status New.
  2. Click Mark contacted at the bottom right of the card.
  3. The status on the card changes to Contacted.

Note: Mark contacted is shown only on leads with the status New.

Drawing of the screen. Your own names and numbers will be different.

7Edit a lead, change its status or mark it lost

  1. Open Leads and find the lead card.
  2. Click the pencil icon on the card. The Edit lead pop-up opens.
  3. Change any detail, for example a new date in Follow up on or more Notes.
  4. Open Status and choose New, Contacted, Converted or Lost.
  5. Click Save changes.

Tip: Choose Lost when the person says no. The lead stays in your list but stops showing in follow-ups.

Note: The Status box is shown only when you edit a lead, not when you add one. To make a real patient record, use Convert on the card and not the status box.

Drawing of the screen. Your own names and numbers will be different.

8Turn a lead into a patient

  1. Open Leads and find the lead card.
  2. Click Convert at the bottom right of the card.
  3. A message asks "Convert … into a patient record?". Click OK.
  4. The status becomes Converted and the card now shows View patient.
  5. Click View patient to open the new patient record.

Tip: Do this when the person comes for their first visit. Then book appointments and make bills under the patient.

Note: A lead can be converted only once. Leads from the booking link and from Patient Recall already have a patient record, so they show View patient and not Convert.

Drawing of the screen. Your own names and numbers will be different.

9Delete a lead

  1. Open Leads and move the mouse over the lead card.
  2. A bin icon appears beside the pencil icon. Click it.
  3. A message asks "Delete …? This cannot be undone."
  4. Click OK.

Tip: If the person just said no, set the status to Lost instead. Delete only wrong or double entries.

Note: A deleted lead cannot be brought back.

Drawing of the screen. Your own names and numbers will be different.

10Add many leads at once from a CSV file

  1. Open Leads from the left menu.
  2. Click the three-dot menu beside Add lead and choose Import from CSV.
  3. Click Download sample CSV to get a ready file with the right column names.
  4. Open the sample in Excel, type your leads under the headings, and save it as a CSV file.
  5. Click the box Click to choose a CSV file and pick your file.
  6. Check the preview. It says how many leads are ready to import.
  7. Click the Import … leads button.
  8. Read the result, then click Done.

Tip: The lead sample has these columns: name, phone, email, problem, followUp, notes. Write dates like 2026-09-15.

Note: Only the name column is a must. Rows without a name are left out. If some rows are skipped, the result screen lists the row number and the reason.

Drawing of the screen. Your own names and numbers will be different.

11Get enquiries from your website into Leads

  1. Open Leads from the left menu.
  2. Click the three-dot menu beside Add lead and choose Website form setup.
  3. A box opens with an Endpoint address and an Example form.
  4. Copy both and send them to the person who looks after your website.
  5. They connect your website's enquiry form to that address.
  6. Click the X to close the box.

Tip: After it is connected, every enquiry from your website shows up here with the source label "Website Form".

Note: This needs a person who can edit your website. The front desk does not need to do anything after it is set up.

Drawing of the screen. Your own names and numbers will be different.

Did this not solve it? Message our support team and we will help you.