What it is forPut the upper and lower scans on a trimmed orthodontic art base: posterior side at right angles to the midline and flush on both casts, heel sides at 115°, lateral sides at 70° (upper) and 65° (lower), a pointed upper and a curved lower anterior, both casts 70 mm in occlusion (or the art portion one third of each cast). Then take the standard pictures from every side and make a report.
What you getThe model with its base on screen, pictures from the front, both sides, the back, both occlusal views and a three-quarter view, a PDF report, an STL with the base, and (when you send it) a "Digital Model Base" section in the patient document.
Where to find itLeft menu → 3D Scans → Model base (ABO trimming), below the viewer
Who can use itOwner and staff with the 3D Scans permission
Good to know: Included from the Advanced plan and in college plans. Also sold on its own as the Digital Model Base plan (1, 2 or 3–4 users; each login works on one device at a time), with its own login page (/model-base/login).
Lessons on this page
1Build the base
- Open 3D Scans, choose the patient and upload the upper and lower STL files (or the scanner ZIP).
- Click Bite View to see both arches together. One arch on its own works too.
- In Model base (ABO trimming) below the viewer, tick ABO base on the model. The outline is drawn around the teeth and the scan is trimmed to it like a cast on a model trimmer, in a second. The scan file itself is not changed — untick it and the original scan is back.
- Choose the height rule: Total 70 mm in occlusion (art portion 13 mm, the standard) or Art portion 1/3 of each cast (keeps the scan as deep as it was taken).
- Change any value your department uses differently: the angles (lateral sides, heels, upper anterior cuts), the heel length (13 mm), the art portion (13 mm), the total height (70 mm), the space behind the last molar (3 mm), beyond the teeth at the sides (4 mm) and in front of the upper incisors (5 mm). Back to the ABO standard puts the defaults back.
- Read the table: each angle and height as set and as built. A ✓ means the base was cut as asked; a warning sign means the scan reached further than that cut allows.
Note: The teeth and the palate are never cut. If the palate is deeper than the land, the base is made a little thicker so its flat face clears it, and a note says so. Under Model colour, choose Golden (stone) for the classic golden study model look, or Default.
Services & PricingInboxImaging (RVG)Ceph Tracing3D ScansPerformanceSettingsPlan & billing
Model base (ABO trimming)
| Measurement | Standard | Built |
|---|---|---|
| Total height in occlusion | 70 mm | 70 mm |
| Upper heel side to posterior side | 115° | 115° |
| Upper lateral side to posterior side | 70° | 70° |
| Lower lateral side to posterior side | 65° | 65° |
Pictures from every sideDownload STL with baseDownload PDF reportSend to document
2Pictures, report and patient document
- Click Pictures from every side: front (in occlusion), right side, left side, back (heels), upper occlusal, lower occlusal and a three-quarter view, all at one scale.
- Add a title, the stage (Pre-treatment, Mid-treatment, Post-treatment or Retention) and notes.
- Click Download PDF report for the pictures and the trimming table, or Send to document to keep it in the patient document.
- Click Download STL with base for a file to print or keep. Most slicers join the scan and the base by themselves.
Services & PricingInboxImaging (RVG)Ceph Tracing3D ScansPerformanceSettingsPlan & billing
Model base pictures
Front — in occlusionRight sideLeft sideBack — heelsUpper — occlusalLower — occlusal
Download PDF reportSend to document
Did this not solve it? Message our support team and we will help you.
